Cabot 3000 Series Wood Toned Deck & Siding Stain + Sealer – 1 Gallon
Cabot 3000 Series Wood Toned Stain + Sealer is a deep-penetrating oil finish built for bare wood. A unique blend of natural linseed oil and alkyd resin carries transparent oxide pigments into the wood, slightly darkening it on application and leaving a flat, translucent-toned finish that weathers gradually to a natural wood hue. One coat is all it takes.
Key Features
- Translucent wood-toned finish — the most natural-looking option in the Cabot exterior line
- Deep-penetrating linseed oil and alkyd formula; minimal film build means no cracking or peeling
- Water repellent — guards against warping and checking
- Mildew resistant and fade resistant
- Ready-mixed natural tones; no tinting required or permitted
Coverage
- Smooth surfaces: approx. 400–600 sq. ft. per gallon
- Rough surfaces: approx. 200–300 sq. ft. per gallon
- Spread rate varies with wood porosity and surface condition
Recommended Uses
New or reconditioned exterior wood only — decks, siding, fences, trim, shingles, shakes and log homes.
Application Notes
Surface must be bare wood. Do not apply over previously painted or sealed surfaces, and do not tint this product. Apply one coat with a quality stain brush or pad applicator; if spraying, back-brush immediately for uniformity. Start at one edge of a board and carry through to the end to avoid lap marks. Allow 24–48 hours to dry. Clean up with mineral spirits or a regionally compliant brush cleaner.